Commercial sectional doors for workshops and units in Surrey
Our commercial sectional door service covers Surrey: Woking, Guildford, Esher and Redhill, plus the surrounding area, with each door made to measure after a free survey.
A commercial sectional door is a heavier-duty sectional door for workshops, small industrial units, farm buildings and trade premises, built with thicker panels, stronger tracks and springs rated for more cycles, and usually motorised with a three-phase or heavy-duty single-phase operator. Vision panels and pass doors are common options.
- Nation
- England
- Towns covered
- 24
- Largest place
- Woking
- Guide price
- from £3,500
- Visits
- Free survey
What should you know about commercial sectional doors in Surrey?
What size of premises do you cover?
This page covers workshops, small units, garages for vans and plant, and farm buildings. For large loading bays with dock levellers and shelters, a specialist industrial installer is the right route.
How is it different from a domestic door?
Commercial doors open more often and are often bigger, so they use springs rated for higher cycle counts, heavier hardware and operators built for frequent use. The safety requirements for powered doors at work also apply.
Which operator suits a commercial door?
Shaft-mounted operators are common on commercial sectional doors because they handle heavier doors and higher use. Three-phase power is typical, though single-phase versions exist.
Which options can you choose?
- High-cycle springsFor doors that open many times a day.
- Service planPlanned maintenance with records.
- Pass doorPedestrian door within the panels.
- Shaft operatorFor heavier doors and frequent use.
- Vision panelsGlazed rows for light and visibility.
How much does a commercial sectional door cost in Surrey?
Guide price: from £3,500 + VAT. Prices include VAT and fitting. Building work to the opening or a new electrical circuit would be quoted separately.
The survey is free and there is no obligation. We measure width, height, headroom, side room and depth, and look at power for an operator.
What rules apply in Surrey?
In England, swapping a garage door for a new one, including an electric sectional door, does not normally need planning permission. Permission or consent can be needed if the house is listed, if it sits in a conservation area or is covered by an Article 4 direction, or if the new door would noticeably change how the house looks from the street. On many newer estates a planning condition removes permitted development rights or requires the garage to be kept for parking, so check your planning history before changing the door or the use of the garage.
Planning in Surrey is handled by the district and borough councils, not the county council.
Most garage door operators run from a switched fused spur or socket. Adding a fused spur or socket to an existing circuit is not notifiable in England, but a brand-new circuit is notifiable under Part P and must be done by a registered electrician or signed off by building control.
At work, powered doors must also be maintained under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Towns we cover in Surrey
- Ashford (Surrey)
- Banstead
- Camberley
- Caterham
- Dorking
- East Molesey
- Egham
- Epsom
- Esher
- Ewell
- Farnham
- Godalming
- Guildford
- Haslemere
- Horley
- Leatherhead
- Redhill
- Reigate
- Staines
- Sunbury-on-Thames
- Walton-on-Thames
- West Molesey
- Weybridge
- Woking
What happens next?
Send your enquiry
Give us the postcode and what you are thinking of; photos are welcome.
Survey and fixed price
A free visit to measure, then a written quote with the exact door.
Manufacture
The door is made for your opening while you wait for your fitting date.
Fit and handover
Usually one day on site, finishing with safety checks and a demonstration.
Questions about commercial sectional doors for workshops and units in Surrey
Do commercial doors need servicing?
Yes. Powered doors at work should be maintained and checked regularly, with records kept.
Do you fit loading bay equipment?
No. We fit sectional doors to workshops and small units. Dock levellers, shelters and full loading bays need a specialist industrial door company.
How much is a commercial sectional door?
Commercial doors are priced on survey. As a guide, a workshop-sized insulated door with an operator starts from £3,500 plus VAT.
Which towns in Surrey do you cover?
We cover Woking, Guildford, Esher, Redhill, Staines, Banstead, Leatherhead and Ewell and other towns across Surrey.
Do I need planning permission in Surrey?
Usually not. Replacing a garage door, including with an electric sectional door, does not normally need planning permission in England unless the house is listed, in a conservation area or Article 4 area, or has planning conditions affecting the garage. Check with your local planning authority if in doubt.
Other services in Surrey
Commercial sectional doors for workshops and units in Surrey
Start with a guide price, then let us confirm it with a free survey.