Single sectional garage doors in Kent
Looking for a single sectional door in Kent? We cover Maidstone, Gillingham, Chatham and Tunbridge Wells and the rest of the area, measuring, supplying and fitting each door.
A single sectional garage door covers a one-car opening, usually around 2.1 to 2.6 metres wide, with four or so horizontal panels that lift up and back along tracks to sit under the ceiling. It is the most common replacement for an old up-and-over door on UK homes, and it gives back the space a canopy door swings into.
- Nation
- England
- Towns covered
- 23
- Largest place
- Maidstone
- Guide price
- £1,695–£3,195
- Visits
- Free survey
What should you know about single sectional doors in Kent?
How long does the job take?
Swapping a single door is normally a one-day job: the old door comes out, the opening is prepared, and the new door is fitted, balanced, tested and handed over.
Can you widen the drive-through width?
Many single sectional doors are fitted behind the opening, which can give a slightly wider clear opening than the old frame allowed. The survey shows what clear width you will end up with.
What are the usual sizes?
Common UK openings are about 7 by 7 feet (2134 by 2134 mm), 7 feet 6 by 7 feet, and 8 by 7 feet (2438 by 2134 mm), but older and newer garages vary. The door is made to your measured opening.
Which options can you choose?
- Manual or electricManual lock and handle, or operator with remotes.
- Window insertsDaylight panels in one section.
- ColoursStandard colours or RAL colours on most ranges.
- Insulated panelsDouble-skin panels with foam core.
How much does a single sectional door cost in Kent?
Guide price: £1,695–£3,195 inc VAT. Prices include VAT and fitting. Building work to the opening or a new electrical circuit would be quoted separately.
The survey is free and there is no obligation. We measure width, height, headroom, side room and depth, and look at power for an operator.
What rules apply in Kent?
In England, swapping a garage door for a new one, including an electric sectional door, does not normally need planning permission. Permission or consent can be needed if the house is listed, if it sits in a conservation area or is covered by an Article 4 direction, or if the new door would noticeably change how the house looks from the street. On many newer estates a planning condition removes permitted development rights or requires the garage to be kept for parking, so check your planning history before changing the door or the use of the garage.
Planning in Kent is handled by the district and borough councils, not the county council (Medway Council also cover parts of the area).
Towns we cover in Kent
- Ashford (Kent)
- Broadstairs
- Canterbury
- Chatham
- Dartford
- Deal
- Dover
- Faversham
- Folkestone
- Gillingham
- Gravesend
- Herne Bay
- Maidstone
- Margate
- Ramsgate
- Rochester
- Sevenoaks
- Sittingbourne
- Strood
- Swanley
- Tonbridge
- Tunbridge Wells
- Whitstable
What happens next?
Send your enquiry
Give us the postcode and what you are thinking of; photos are welcome.
Survey and fixed price
A free visit to measure, then a written quote with the exact door.
Manufacture
The door is made for your opening while you wait for your fitting date.
Fit and handover
Usually one day on site, finishing with safety checks and a demonstration.
Questions about single sectional garage doors in Kent
Can I have a manual door and add a motor later?
Usually, yes, as long as the door is suitable for powered operation and is set up and checked to the powered-door safety standard when the motor goes on.
Will I lose headroom inside the garage?
The door parks under the ceiling, so the clear height inside is reduced by the parked door and tracks. On low ceilings a low-headroom track keeps the door tighter to the ceiling.
Can a sectional door fit my existing opening?
In most cases, yes. We check headroom above the opening, side room for the tracks and the depth of the garage at survey.
Which towns in Kent do you cover?
We cover Maidstone, Gillingham, Chatham, Tunbridge Wells, Folkestone, Margate, Ashford (Kent) and Canterbury and other towns across Kent.
Do I need planning permission in Kent?
Usually not. Replacing a garage door, including with an electric sectional door, does not normally need planning permission in England unless the house is listed, in a conservation area or Article 4 area, or has planning conditions affecting the garage. Check with your local planning authority if in doubt.
Other services in Kent
Single sectional garage doors in Kent
Get a guide price in under a minute, or book your free survey.