Insulated sectional garage doors in Keady

Choosing an insulated sectional door for a home in Keady

Do insulated doors weigh more?

Yes. Foam-filled steel panels are heavier than single-skin doors, which is why every sectional door is balanced by springs sized to that door, either torsion springs on a shaft above the opening or tension springs along the tracks, depending on the range and size. They are set during fitting so the door feels light by hand and the motor is not straining.

How much difference do seals make?

Panels are only half the story. A good door has a flexible bottom seal that follows uneven floors, brush or rubber side seals, a head seal and finger-safe joints with gaskets between sections. A badly sealed insulated door can lose more heat round the edges than through the panels, so seals are checked and set on fitting day.

Which options are available in Keady?

• Seals all roundBottom, side and head seals, plus gaskets between sections.
• Panel thicknessTypically 40 to 42 mm double-skin, or thicker thermally broken panels on premium ranges.
• Any finishRibbed, flush, cassette, woodgrain and coloured finishes are all available with insulated panels.
• Window insertsAdd glazed inserts for daylight; they slightly reduce thermal performance.

How much does an insulated sectional door cost in Keady?

Guide price: £2,095–£3,495 inc VAT. That covers the door, fitting, removal of a standard old door and VAT; the fixed price follows the free survey.

At the free survey we measure everything the manufacturer needs, check the brickwork, lintel and floor, and agree the door details with you.

Do you need permission in Keady?

Keady falls under Armagh City, Banbridge and Craigavon Borough Council for planning and building control, which is the place to check if your home is listed or in a conservation area.

In Northern Ireland a new door within the existing opening generally needs no planning permission. Listed buildings and conservation areas are the exceptions.

Under the Windsor Framework, products placed on the market in Northern Ireland follow EU rules, so doors carry CE marking (with UKNI where a UK body assessed them). UKCA marking on its own is not accepted in Northern Ireland.

What happens next?