Double sectional garage doors in Derbyshire
Looking for a double sectional door in Derbyshire? We cover Derby, Chesterfield, Long Eaton and Ilkeston and the rest of the area, measuring, supplying and fitting each door.
A double sectional garage door is a single wide sectional door that spans a two-car opening, typically around 4.3 to 4.9 metres wide, in place of two separate doors. Because it lifts vertically and parks under the ceiling, a double sectional keeps the whole drive clear and lets two cars use the full width of the opening.
- Nation
- England
- Towns covered
- 14
- Largest place
- Derby
- Guide price
- £3,295–£4,995
- Visits
- Free survey
What should you know about double sectional doors in Derbyshire?
Will a standard operator lift it?
Domestic operators come in ratings for different door areas. Wide doors need an operator rated for the size and weight, and on very wide or heavy doors a more powerful unit or a different drive arrangement is specified.
One wide door or two single doors?
If your garage has a central pier, two single doors may still make sense. If the opening is clear from side to side, one wide sectional door gives the most usable width and a cleaner look. On some properties removing a central pier is possible, but that is structural work needing proper design, not a decision to make on the doorstep.
What sizes are common in the UK?
Many older double garages have openings of about 14 feet by 7 feet (roughly 4267 by 2134 mm) or 16 feet by 7 feet (about 4877 by 2134 mm). New builds vary, which is why every door is made to the measured opening rather than to a stock size.
Which options can you choose?
- Heavier operatorOperator rated for the door area and weight.
- Any designRibbed, large rib, flush, cassette, woodgrain and glazed options.
- Wicket doorIntegrated pedestrian door on selected ranges.
- Matching side doorPedestrian door in the same finish.
- Window insertsRows of windows in one section for daylight.
How much does a double sectional door cost in Derbyshire?
Guide price: £3,295–£4,995 inc VAT. Prices include VAT and fitting. Building work to the opening or a new electrical circuit would be quoted separately.
The survey is free and there is no obligation. We measure width, height, headroom, side room and depth, and look at power for an operator.
What rules apply in Derbyshire?
In England, swapping a garage door for a new one, including an electric sectional door, does not normally need planning permission. Permission or consent can be needed if the house is listed, if it sits in a conservation area or is covered by an Article 4 direction, or if the new door would noticeably change how the house looks from the street. On many newer estates a planning condition removes permitted development rights or requires the garage to be kept for parking, so check your planning history before changing the door or the use of the garage.
Planning in Derbyshire is handled by the district and borough councils, not the county council (Derby City Council also cover parts of the area).
Towns we cover in Derbyshire
- Alfreton
- Belper
- Buxton
- Chesterfield
- Derby
- Dronfield
- Glossop
- Heanor
- Ilkeston
- Long Eaton
- New Mills
- Ripley
- Staveley
- Swadlincote
What happens next?
Tell us about the garage
Use the form, the guide-price tool or call. A few photos of the opening help.
Free survey
We measure the opening and confirm the options, then send a fixed written price.
Made to measure
Your door is ordered to the surveyed size. The lead time is on your quote.
Fitting day
The old door comes out, the new door goes in and is balanced, tested and handed over.
Questions about double sectional garage doors in Derbyshire
Is a double sectional door heavy to open by hand?
When it is correctly balanced, the springs carry most of the weight. Even so, most people choose electric operation on a double.
Do I need more headroom for a double door?
Headroom depends more on the track and spring system than the width. Where headroom is tight, a low-headroom version is available.
Can you replace two single doors with one double sectional?
Only if the central pier can be removed safely. That needs structural assessment and often a new lintel, which is arranged separately before the door is ordered.
Which towns in Derbyshire do you cover?
We cover Derby, Chesterfield, Long Eaton, Ilkeston, Swadlincote, Staveley, Belper and Heanor and other towns across Derbyshire.
Do I need planning permission in Derbyshire?
Usually not. Replacing a garage door, including with an electric sectional door, does not normally need planning permission in England unless the house is listed, in a conservation area or Article 4 area, or has planning conditions affecting the garage. Check with your local planning authority if in doubt.
Other services in Derbyshire
Double sectional garage doors in Derbyshire
Tell us about your garage and we will come back with clear next steps.