Commercial sectional doors for workshops and units in Kent
Our commercial sectional door service covers Kent: Maidstone, Gillingham, Chatham and Tunbridge Wells, plus the surrounding area, with each door made to measure after a free survey.
A commercial sectional door is a heavier-duty sectional door for workshops, small industrial units, farm buildings and trade premises, built with thicker panels, stronger tracks and springs rated for more cycles, and usually motorised with a three-phase or heavy-duty single-phase operator. Vision panels and pass doors are common options.
- Nation
- England
- Towns covered
- 23
- Largest place
- Maidstone
- Guide price
- from £3,500
- Visits
- Free survey
What should you know about commercial sectional doors in Kent?
What size of premises do you cover?
This page covers workshops, small units, garages for vans and plant, and farm buildings. For large loading bays with dock levellers and shelters, a specialist industrial installer is the right route.
Which operator suits a commercial door?
Shaft-mounted operators are common on commercial sectional doors because they handle heavier doors and higher use. Three-phase power is typical, though single-phase versions exist.
What are the duties at work?
Powered doors in workplaces must be safe and maintained. In Great Britain that falls under workplace and work equipment law, and in Northern Ireland under its equivalent regulations. Regular servicing with records is the practical way to show the door is kept safe.
Which options can you choose?
- Service planPlanned maintenance with records.
- Shaft operatorFor heavier doors and frequent use.
- Pass doorPedestrian door within the panels.
- Vision panelsGlazed rows for light and visibility.
- High-cycle springsFor doors that open many times a day.
How much does a commercial sectional door cost in Kent?
Guide price: from £3,500 + VAT. Prices include VAT and fitting. Building work to the opening or a new electrical circuit would be quoted separately.
At the free survey we measure everything the manufacturer needs, check the brickwork, lintel and floor, and agree the door details with you.
What rules apply in Kent?
In England, swapping a garage door for a new one, including an electric sectional door, does not normally need planning permission. Permission or consent can be needed if the house is listed, if it sits in a conservation area or is covered by an Article 4 direction, or if the new door would noticeably change how the house looks from the street. On many newer estates a planning condition removes permitted development rights or requires the garage to be kept for parking, so check your planning history before changing the door or the use of the garage.
Planning in Kent is handled by the district and borough councils, not the county council (Medway Council also cover parts of the area).
Most garage door operators run from a switched fused spur or socket. Adding a fused spur or socket to an existing circuit is not notifiable in England, but a brand-new circuit is notifiable under Part P and must be done by a registered electrician or signed off by building control.
At work, powered doors must also be maintained under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Towns we cover in Kent
- Ashford (Kent)
- Broadstairs
- Canterbury
- Chatham
- Dartford
- Deal
- Dover
- Faversham
- Folkestone
- Gillingham
- Gravesend
- Herne Bay
- Maidstone
- Margate
- Ramsgate
- Rochester
- Sevenoaks
- Sittingbourne
- Strood
- Swanley
- Tonbridge
- Tunbridge Wells
- Whitstable
What happens next?
Get a guide price
Our four-step tool gives a realistic range in under a minute.
Book the free survey
We check headroom, side room, depth and power on site.
Confirm your door
Agree finish, colour and options against a fixed written price.
Installation
We remove the old door, fit the new one and test every safety feature.
Questions about commercial sectional doors for workshops and units in Kent
How much is a commercial sectional door?
Commercial doors are priced on survey. As a guide, a workshop-sized insulated door with an operator starts from £3,500 plus VAT.
Do commercial doors need servicing?
Yes. Powered doors at work should be maintained and checked regularly, with records kept.
Do you fit loading bay equipment?
No. We fit sectional doors to workshops and small units. Dock levellers, shelters and full loading bays need a specialist industrial door company.
Which towns in Kent do you cover?
We cover Maidstone, Gillingham, Chatham, Tunbridge Wells, Folkestone, Margate, Ashford (Kent) and Canterbury and other towns across Kent.
Do I need planning permission in Kent?
Usually not. Replacing a garage door, including with an electric sectional door, does not normally need planning permission in England unless the house is listed, in a conservation area or Article 4 area, or has planning conditions affecting the garage. Check with your local planning authority if in doubt.
Other services in Kent
Commercial sectional doors for workshops and units in Kent
Tell us about your garage and we will come back with clear next steps.