Commercial sectional doors for workshops and units in Hampshire
We supply and fit commercial sectional doors across Hampshire, including Southampton, Portsmouth, Basingstoke and Gosport, with a free survey and a fixed written price for every door.
A commercial sectional door is a heavier-duty sectional door for workshops, small industrial units, farm buildings and trade premises, built with thicker panels, stronger tracks and springs rated for more cycles, and usually motorised with a three-phase or heavy-duty single-phase operator. Vision panels and pass doors are common options.
- Nation
- England
- Towns covered
- 21
- Largest place
- Southampton
- Guide price
- from £3,500
- Visits
- Free survey
What should you know about commercial sectional doors in Hampshire?
Can a commercial door be insulated?
Yes. Insulated panels are standard on most commercial sectional doors and help heated workshops keep costs down.
How is it different from a domestic door?
Commercial doors open more often and are often bigger, so they use springs rated for higher cycle counts, heavier hardware and operators built for frequent use. The safety requirements for powered doors at work also apply.
What are the duties at work?
Powered doors in workplaces must be safe and maintained. In Great Britain that falls under workplace and work equipment law, and in Northern Ireland under its equivalent regulations. Regular servicing with records is the practical way to show the door is kept safe.
Which options can you choose?
- Shaft operatorFor heavier doors and frequent use.
- Vision panelsGlazed rows for light and visibility.
- High-cycle springsFor doors that open many times a day.
- Pass doorPedestrian door within the panels.
- Service planPlanned maintenance with records.
How much does a commercial sectional door cost in Hampshire?
Guide price: from £3,500 + VAT. The figure includes VAT, fitting and taking away a standard old door. Your survey turns it into a fixed price.
At the free survey we measure everything the manufacturer needs, check the brickwork, lintel and floor, and agree the door details with you.
What rules apply in Hampshire?
In England, swapping a garage door for a new one, including an electric sectional door, does not normally need planning permission. Permission or consent can be needed if the house is listed, if it sits in a conservation area or is covered by an Article 4 direction, or if the new door would noticeably change how the house looks from the street. On many newer estates a planning condition removes permitted development rights or requires the garage to be kept for parking, so check your planning history before changing the door or the use of the garage.
Planning in Hampshire is handled by the district and borough councils, not the county council (Portsmouth City Council and Southampton City Council also cover parts of the area).
Most garage door operators run from a switched fused spur or socket. Adding a fused spur or socket to an existing circuit is not notifiable in England, but a brand-new circuit is notifiable under Part P and must be done by a registered electrician or signed off by building control.
At work, powered doors must also be maintained under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Towns we cover in Hampshire
- Aldershot
- Alton
- Andover
- Basingstoke
- Bordon
- Eastleigh
- Fareham
- Farnborough
- Fleet
- Gosport
- Havant
- Hedge End
- Hythe
- New Milton
- Portsmouth
- Romsey
- Southampton
- Totton
- Waterlooville
- Winchester
- Yateley
What happens next?
Get a guide price
Our four-step tool gives a realistic range in under a minute.
Book the free survey
We check headroom, side room, depth and power on site.
Confirm your door
Agree finish, colour and options against a fixed written price.
Installation
We remove the old door, fit the new one and test every safety feature.
Questions about commercial sectional doors for workshops and units in Hampshire
Do commercial doors need servicing?
Yes. Powered doors at work should be maintained and checked regularly, with records kept.
Do you fit loading bay equipment?
No. We fit sectional doors to workshops and small units. Dock levellers, shelters and full loading bays need a specialist industrial door company.
How much is a commercial sectional door?
Commercial doors are priced on survey. As a guide, a workshop-sized insulated door with an operator starts from £3,500 plus VAT.
Which towns in Hampshire do you cover?
We cover Southampton, Portsmouth, Basingstoke, Gosport, Waterlooville, Farnborough, Eastleigh and Winchester and other towns across Hampshire.
Do I need planning permission in Hampshire?
Usually not. Replacing a garage door, including with an electric sectional door, does not normally need planning permission in England unless the house is listed, in a conservation area or Article 4 area, or has planning conditions affecting the garage. Check with your local planning authority if in doubt.
Other services in Hampshire
Commercial sectional doors for workshops and units in Hampshire
Start with a guide price, then let us confirm it with a free survey.